Notice: Product Images may differ from the actual product. Image may be a representation of this item.

Manley Rotating Assembly, FORD 4.6L 3.750 STROKE/3.572/-14cc DISH

$3,304.89

SKU: 29520UBR

Available on backorder

Manley Rotaing Assembly, FORD 4.6L 3.750 STROKE/3.572/-14cc DISH.


  • Lightweight 4340 forged steel crankshaft
  • 4340 Forged steel H-Beam connecting rods with 3/8” ARP 8740 cap screws or optional ARP 2000 cap screws
  • 2618 Forged aluminum Platinum Series pistons with Premium Chrome Moly wrist pins
  • High Performance piston rings & high performance Clevite® “H” Series rod bearings (narrowed)
SKU: 29520UBR Categories: ,

GTIN: 00807298107608

Weight 61.000 lbs
Dimensions 33.000 × 10.000 × 10.000 in
Product Market

Domestic

Piston Volume

-14.00 CC

Additional Info

Main bearings not included with kit. Ford block M-6010-BOSS50 uses main bearing 33130. Order part number 33120 (Romeo Iron), 33130 (Windsor Iron) or 33140 (Windsor Aluminum)

Cylinder Head

3 Valve Cylinder Head

Product Type

Engine Crankshaft Rotating Assembly

Rod Bolt Material

ARP 2000

Engine Stroke

3.750 IN

Piston Head Type

Dish

Displacement

300 CID

Piston Bore Diameter

3.572 IN

Crankshaft Part Number

190360

Piston Part Number

595520C

Connecting Rod Part Number

14044

Piston Ring Part Number

46620

Compression Ratio with Head

9.51:1 with 51.00 CC Head

Crankshaft Balance Type

Unbalanced

Engine Detail – Web

4.6L Modular

Makes

Ford

Engines

4.6L Modular
Instructions: Enter a value in the un-shaded boxes below as they pertain to your engine.
Note: For pistons BELOW the block @ TDC – value in box must be a POSITIVE number (.000)
Note: For pistons ABOVE the block @ TDC – value in box must be a NEGATIVE number (-.000)
Note: For a DISH piston – value in box must be a POSITIVE number (0.0)
Note: For a DOME piston – value in box must be a NEGATIVE number (-0.0)
Note: Manipulate the DOME/DISH & PISTON to DECK volumes to get the ratio you want.
Enter the number of cylinders of your engine
Bore
Finished bore of your engine
Stroke
Stroke of your engines crankshaft
Rod Length
Ctr. to Ctr. length of your connecting rods
Gasket Bore
Head Gasket bore diameter
Comp. Gasket
Compressed Head Gasket thickness
Block Deck Height
Center of main bearing bore to top of block
Top Ring Down
Top of 1st ring to top of pistons(FLAT)
Chamber Volume
Cylinder Head chamber volume in CC’s
Dome/Dish Volume
DOME (-) or DISH (+) vol. (theoretical) in CC’s
Piston to Deck
Top of BLOCK to top of piston (FLAT) @ TDC
Click “Calculate” for dimension results.
Total Volume
 
Cylinder Volume
Total cylinder volume in CC’s =
Clearance Volume
All effective vol. above block deck @ TDC in CC’s =
Gasket Volume
Volume of your head gasket in CC’s =
Top Ring Volume
Total volume above the top ring @ TDC in CC’s =
Deck Volume
Volume of area above the pistons @ TDC in CC’s =
Piston Top Land
Piston top land diameter for volume calculations =
1/2 Stroke
1/2 stroke of your engine’s crankshaft in inches =
Compression Ht.
Ctr. of piston pin to top of piston (FLAT) in inches =
Cubic Inches
Cubic inch displacement of your engine =
For the given dimensions, your compression ratio