Notice: Product Images may differ from the actual product. Image may be a representation of this item.

Manley Dodge 8.3L Viper V10 H-Beam Connecting Rod Set – 6.240 in. Length

Your Price: $948.97

SKU: 14083-10

Call for Availability

Manley Connecting Rod, ROD-VIPER 8.3L/8.4L 6.240 H/B.

When it comes to H-Beam connecting rods, not all are created equal. Manley’s H-Beam Series stands out as a superior choice, offering exceptional quality at an economical price point. These connecting rods are meticulously crafted to meet the same high-quality standards as our renowned Sportsmaster® and Pro Series rods.

  • Exacting Tolerances: Our H-Beam rods are finished to exacting tolerances to ensure precision and performance.
  • Attention to Detail: Every aspect, from final hone size to thread detail, bend, and twist, is treated with utmost seriousness to deliver connecting rods of the highest quality.
  • Exceptional Performance: Manley’s H-Beam rods are designed to outperform others on the market, giving you a competitive advantage on the track.
  • Flexible Bolt Options: Tailor your connecting rods to your specific requirements with a choice of ARP 8740 or ARP 2000 bolts.
SKU: 14083-10 Categories: ,

GTIN: 00807298100586

Product Market


Average Gram Weight

670 GR

Big End Bore

2.252 IN

Center To Center Length

6.240 IN

Journal Size

2.126 IN



Pin End Bore

0.9281 IN

Wrist Pin Diameter

0.927 IN

Additional Info

0.945 IN or 0.984 IN Wrist Pin Diameter options, Pin End Bore options 0.9457 IN or 0.9848 IN

Connecting Rod Series


Product Type

Engine Connecting Rod Set

Rod Quantity


Connecting Rod Type


Pin End Width

1.000 IN

Connecting Rod Material


Engine Detail – Web

8.3L Viper V10, 8.4L Viper V10

Instructions: Enter a value in the un-shaded boxes below as they pertain to your engine.
Note: For pistons BELOW the block @ TDC – value in box must be a POSITIVE number (.000)
Note: For pistons ABOVE the block @ TDC – value in box must be a NEGATIVE number (-.000)
Note: For a DISH piston – value in box must be a POSITIVE number (0.0)
Note: For a DOME piston – value in box must be a NEGATIVE number (-0.0)
Note: Manipulate the DOME/DISH & PISTON to DECK volumes to get the ratio you want.
Enter the number of cylinders of your engine
Finished bore of your engine
Stroke of your engines crankshaft
Rod Length
Ctr. to Ctr. length of your connecting rods
Gasket Bore
Head Gasket bore diameter
Comp. Gasket
Compressed Head Gasket thickness
Block Deck Height
Center of main bearing bore to top of block
Top Ring Down
Top of 1st ring to top of pistons(FLAT)
Chamber Volume
Cylinder Head chamber volume in CC’s
Dome/Dish Volume
DOME (-) or DISH (+) vol. (theoretical) in CC’s
Piston to Deck
Top of BLOCK to top of piston (FLAT) @ TDC
Click “Calculate” for dimension results.
Total Volume
Cylinder Volume
Total cylinder volume in CC’s =
Clearance Volume
All effective vol. above block deck @ TDC in CC’s =
Gasket Volume
Volume of your head gasket in CC’s =
Top Ring Volume
Total volume above the top ring @ TDC in CC’s =
Deck Volume
Volume of area above the pistons @ TDC in CC’s =
Piston Top Land
Piston top land diameter for volume calculations =
1/2 Stroke
1/2 stroke of your engine’s crankshaft in inches =
Compression Ht.
Ctr. of piston pin to top of piston (FLAT) in inches =
Cubic Inches
Cubic inch displacement of your engine =
For the given dimensions, your compression ratio