Sale!
Awaiting product image

Notice: Product Images may differ from the actual product. Image may be a representation of this item.

Manley Piston Ring, RING-4.600 .043,3/16 STEEL TOP

$452.42

SKU: 46558ST-8

Available on backorder

–

Manley Piston Ring, RING-4.600 .043,3/16 STEEL TOP.


SKU: 46558ST-8 Categories: ,

GTIN: 00807298040912

Weight 2.000 lbs
Dimensions 6.000 × 6.000 × 2.500 in
Product Market

Domestic
Bore Diameter

4.600 IN
Product Type

Engine Piston Ring Set
Installation Type

File Fit
Top Ring Width

0.043 IN
2nd Ring Width

0.043 IN
Oil Ring Width

3/16 IN
Oil Ring Tension

16-20 LBS
Top Ring Type

Premium Steel
Instructions: Enter a value in the un-shaded boxes below as they pertain to your engine.
Note: For pistons BELOW the block @ TDC – value in box must be a POSITIVE number (.000)
Note: For pistons ABOVE the block @ TDC – value in box must be a NEGATIVE number (-.000)
Note: For a DISH piston – value in box must be a POSITIVE number (0.0)
Note: For a DOME piston – value in box must be a NEGATIVE number (-0.0)
Note: Manipulate the DOME/DISH & PISTON to DECK volumes to get the ratio you want.
Enter the number of cylinders of your engine
Bore
Finished bore of your engine
Stroke
Stroke of your engines crankshaft
Rod Length
Ctr. to Ctr. length of your connecting rods
Gasket Bore
Head Gasket bore diameter
Comp. Gasket
Compressed Head Gasket thickness
Block Deck Height
Center of main bearing bore to top of block
Top Ring Down
Top of 1st ring to top of pistons(FLAT)
Chamber Volume
Cylinder Head chamber volume in CC’s
Dome/Dish Volume
DOME (-) or DISH (+) vol. (theoretical) in CC’s
Piston to Deck
Top of BLOCK to top of piston (FLAT) @ TDC
Click “Calculate” for dimension results.
Total Volume
 
Cylinder Volume
Total cylinder volume in CC’s =
Clearance Volume
All effective vol. above block deck @ TDC in CC’s =
Gasket Volume
Volume of your head gasket in CC’s =
Top Ring Volume
Total volume above the top ring @ TDC in CC’s =
Deck Volume
Volume of area above the pistons @ TDC in CC’s =
Piston Top Land
Piston top land diameter for volume calculations =
1/2 Stroke
1/2 stroke of your engine’s crankshaft in inches =
Compression Ht.
Ctr. of piston pin to top of piston (FLAT) in inches =
Cubic Inches
Cubic inch displacement of your engine =
For the given dimensions, your compression ratio

Related products